SPORT FISHING 450 ANCHOR WINCH POWERWINCH
2
SPECIFICATIONS
DAVIT/BOW ROLLER
This product requires the use of a closed loop davit or bow roller. Davit or bow roller
must be installed prior to installing anchor winch to ensure proper performance.
CAUTION USE OF A DAVIT WITH AN OPEN LOOP IS NOT RECOMMENDED WITH THIS
PRODUCT
. USE A DAVIT WITH A CLOSED LOOP TO PREVENT SERIOUS PERSONAL INJURY
AND
/OR PROPERTY DAMAGE.
FURNISHED
MATERIALS:
qty Description qty Description
1 Anchor Winch 1 25A Circuit Breaker
3 5/16-18 x 3.5 Stud 1 Switch Plate
3 5/16 Lock Washer 4 #10 x 3/4 Screw
3 5/16 Flat Washer 1 Switch, DPDT
3 5/16-18 Nut 1 Mounting Template
REQUIRED MATERIALS (NOT INCLUDED WITH WINCH)
Marine grade plywood for under deck support (optional).
Loctite 242 thread locker or equivalent (optional).
Silicone sealant.
R
EQUIRED MATERIALS FOR ELECTRICAL INSTALLATION
The following items are required for the electrical installation Sport Fishing 450
winch. These items are furnished by the installer.
Qty Description
2 ft 12 awg RED Wire Class 105˚C
2 ft 12 awg BLACK Wire Class 105˚C
70 ft 6 awg RED Wire Class 105˚C 6 awg wire is the "run" wire from anchor to
switch and battery to switch. Length is
based on installation.
70 ft 6 awg BLACK Wire Class 105˚C
10 5/16" 6 awg ring terminals
4 5/16" 12 awg ring terminals
4 1/4" 12 awg insulated female
spade quick disconnects
6 1/4-20 x 1/2 Screws Screws and nuts should be stainless
steel to avoid rust and corrosion.
6 1/4-20 Nuts
Wire ties
2 ft 1" diameter heat shrink
2 ft 2" diameter heat shrink
Comments to this Manuals