Powerwinch Quick Catch Pot Puller User Manual download pdf (Page 6)

CAPSTAN POWERED LIFT ASSIST POWERWINCH

MOUNTING THE UNIT

Mounting Template

Centerline

of Davit/Bow Roller

5/16" Mounting Stud

(x3)

Flat Washer

Lock Washer

5/16" Nut

(x3)

pwcs001

Drill Holes as

Shown on Template

(4 total)

BOW OF BOAT

Center Of Rope

Anchor Winch To Davit

5/16"

[7.9mm]

3 1/2"

(88.9mm]

5 1/2"

[139.7mm]

6 7/8"

[174.6mm]

3 1/4"

[82.6mm]

STERN OF BOAT

1/2" Hole Thru

Wire Harness

3/8" Hole Thru

Winch Mounting Hole

(3 Plcs)

P1053700AV Mounting Template

Drill 5/8" Hole for Foot Switch

(see text for location suggestions)

1. Place the mounting template on the deck in the desired

location and secure

with tape.

a. The centerline of the capstan must line up with the centerline of the

davit or bow roller.

2. Drill the holes as marked on the template.

3. Remove the template.

4. Use a small amount of thread locker on the end of the studs then thread the

5/16-18 x 3 1/2" studs into the winch. Hand tighten until snug.

5. Align the winch and the studs with the holes in the deck. Insert the wires

through the hole in the deck. Lower the winch to the deck.

6. Under the deck, secure the winch to the deck use one (1) each 5/16 flat

washer, 5/16 lock washer and 5/16 nut on each of the studs. Tighten the

nuts to secure the winch to the deck.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Powerwinch Quick Catch Pot Puller User Manual Page 6

Comments to this Manuals

Related products and manuals for Accessories for water Powerwinch Quick Catch Pot Puller